Chapter 4: function description, 1 system setting, 1 system information – TP-Link TL-SG2224WEB User Manual
Page 18: 2 file transfer, 3 reboot & reset
11
Web Smart Gigabit Switch Family User's Guide
TL-SG2216WEB/TL-SG2224WEB
Chapter 4: Function Description
This section presents the network concepts referred in switch function
description.
4.1 System Setting
System setting contains the following topics: displaying and configuring the
switch information, upgrading firmware, backuping and loading configuration,
rebooting and soft-resetting, configuring username and password.
4.1.1 System Information
The system information contains a hardware version, software version, system
description, system name, system location, contact information and run time.
4.1.2 File Transfer
The TL-SG2216WEB/TL-SG2224WEB Web-Smart Switch Family is equipped
with a configuration backup function, configuration loading and system
upgrading.
The configuration file and executive file are transferred in TFTP protocol.
TFTP (Trivial File Transfer Protocol) is dedicated to transferring files between
two network stations. It’s based on UDP protocol.
4.1.3 Reboot & Reset
The “Reset” indicates “Soft-reset” here. Soft-resetting restores the switch
configuration to default except the switch IP address.