Technical specifications, Contact us – Transition Networks SBFTF1010-130 User Manual
Page 6
10
SBFTF1010-130
Technical Support: 1.800.466.4526. Press "2" -- International: 1.408.744.2751
Technical specifications
Standards:
IEEE 802.3
™
2000
Regulatory:
Emissions: EN55022 Class A, Immunity:
EN55024
Safety compliance:
UL listed, CE Mark (wall-mount power supply)
Data Rate:
10 Mbps, 100 Mbps
Dimensions:
3.25” W, 1” H, 4.8” L
(82.6 mm x 25 mm x 121.9mm)
Weight:
10 oz. approximately
Power consumption:
2.4 watts
Power supply:
12VDC, 0.4A minimum
Operating temp:
0°C to 50°C (32°F to 140°F )
Switching time:
<189 ms (primary to secondary port)
Storage temp:
-20°C to +85°C (-4°F to 185°F)
Humidity:
5% to 95%, non-condensing
Altitude:
0 – 10,000 feet
Warranty:
Lifetime
11
SBFTF1010-130
[email protected] -- Click the “Transition Now” link for live Web chat.
Contact Us
Technical support
Technical support is available at [email protected]
• US and Canada:
1-800-260-1312 (24 hours)
• International: 00-1-952-941-7600
(24 hours)
Transition now
Chat live via the Web with Transition Networks Technical Support. Log onto
www.transition.com and click the Transition Now link.
Web-based seminar
Transition networks provides seminars via live, web-based training. Log onto
www.transition.com and click the Learning Center link.
Ask a question anytime by sending an email to our technical support staff:
[email protected]
Address
Transition Networks
6475 City West Parkway
Minneapolis, MN 55344, U.S.A.
Telephone:
952-941-7600,
Toll free:
800-526-9267
Fax:
952-941-2322
Declaration of Conformity
Name of Mfg:
Transition Networks, 6475 City West Parkway,
Minneapolis, MN 55344 U.S.A.
Model:
SBFTF1010-130 Stand-Alone Fault-Tolerant Redundant Link
Protector
Part Number:
SBFTF1010-130
Regulation:
EMC Directive 89/336/EEC
Purpose:
To declare that the SBFTF1010-130 to which this declaration
refers is in conformity with the following standards:
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; FCC Part 15 Subpart B;
21CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
10, 2006
Stephen Anderson, Vice-President of Engineering
Date