Topcom DIABLO 150 - Manual (Page 3)

Topcom Diablo 150/Twin/Triple/Quattro 3
Topcom Diablo 150/Twin/Triple/Quattro
ENGLIS
H
2 Display
3 Installation
• Plug one end of the phone cable into the phone unit and the other end into the telephone line wall
socket.
Î
Connect the small plug of the AC adaptor to the phone and the other end of the adapter
cable to the electric socket.
• Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset..
Put the handset on the base unit. The red Charge LED will lit as long as the handset is on the base.
Charge the handset for a period of 24 hours before using the handset for the first time. To extend the
battery life time, discharge the batteries completely from time to time. As soon as the handset emits a
warning tone or when the battery icon
is empty, you have to put it back on the base unit for charging.
You are online
INT = Internal communication
EXT = External communication There are more digits on the left
New numbers in call list There are more digits on the right
Rechargeable battery level indicator Program mode
The antenna indicates the quality of
reception
The antenna blinks when the handset is
out of range! There are new messages in your voice
mail
- Steady = Answering machine ON
- Blinking= New messages
Microphone is muted - x - x = handset number
Memory records are being retrieved or
set up hh:mm Time: hh = hours, mm = minutes
The keypad is locked Answered calls
Unanswered calls
Base
Telephone cord
Power cable
TEL.
SOCKET
Multi charger
Diablo
150
+ -
- +