Manual channel set-up, Automatic update – Technicolor - Thomson 27LB120S4 User Manual

Page 13

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been stored during the initial set-
up. This can happen if you are setting up cable network channels. Setting up channels manually requires every
setting for a particular channel to be entered, one at a time.

MANUAL INSTALLATION

Return

Standard

EURO…

Frequency

150.75MHz

Programme name

BBC2

Fine-tuning

------|----------

Store on programme

Decoder

Teletext char. set

1…

Display the OVERVIEW

menu by pressing the

MENU button.

Select the Installation

option and press OK

confirm.

Select the relevant country and press OK.

Select the Manual Installation

option from the

INSTALLATIO N

menu and press OK to confirm.

Select the Standard option and then the relevant standard for your country using the ½ / ¾ buttons.

Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg,
DK for Eastern Europe ,the Middle East and Asia, EURO for Western Europe, Australia and New Zealand.

Select the Frequency

option. Use the ½ or ¾ button to start the search in descending or ascending order.

When a channel is found, pictures appear.
Note : If the channel name is found,it is displayed next to Programme name option.
3.

If the picture is not clear you can adjust the setting. You do this by selecting the Fine tuning option and

adjusting it with the ½ / ¾ buttons.
4.

If the channel is encrypted and you want to connect a decoder, select the Decoder

option and check the box

by pressing the OK button.
5.

Then select the Teletext char. set

option and choose the character set that will be used for Teletext on this

channel using the ½ / ¾ buttons. The following character sets are available:
1 : Western Europe
2 : Eastern Europe
3 : Turkish and Greek
4 : Russian and Bulgarian
5 : Arabic
6 : Farsi

The character set selected determines how characters are displayed on Teletext screens.

Select the Store on programme

option to assign a number to the channel. Enter the number using the

numeric buttons. Press the OK button to confirm.
Important: As soon as you change a setting in the

MANUAL INSTALLATION menu, the channel number starts

flashing under the

Store on programme

option .To confirm your change you must select the

Store on programme

option and press

OK. If you do not confirm the chang, it will be cancelled when you change channel or put the television

into standby mode.

Repeat this procedure (2 to 6) to find other channels.

Automatic update:

Auto update allows you to set up channels just launched or any channels that are missing or wrongly set up.
You can access

Automatic update menu by selecting the line inside the INSTALLATION menu.

Return: return to the INSTALLATION menu

Standard: Select the relevant standard for your country using the ½ / ¾ buttons.
Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg,
DK for Eastern Europe ,the Middle East and Asia, EURO for Western Europe, Australia and New Zealand.

Start: Press OK to start the auto update function
The Frequency is incrementing during the progress of the searching. “New pr. found” is incremented each time
when a PR, which is not already installed, is found. When the highest frequency is reached, the auto update fuction
will stop. Or if you press EXIT button, you will also stop the auto update fuction.