Teledyne TRACE OXYGEN ANALYZER 356WA User Manual
Page 35
A-1
T
T
T
T
Trace Oxyg
race Oxyg
race Oxyg
race Oxyg
race Oxygen Anal
en Anal
en Anal
en Anal
en Analyz
yz
yz
yz
yzer
er
er
er
er
Appendix
Appendix
Appendix
Appendix
Appendix
Teledyne Analytical Instruments
Appendix
Appendix
Appendix
Appendix
Appendix
Specifications
Specifications
Specifications
Specifications
Specifications
Standard Ranges:
Standard Ranges:
Standard Ranges:
Standard Ranges:
Standard Ranges:
Three ranges between 0-10 PPM and
0-5000 PPM O
2
(0-2 PPM O
2
avail-
able as an option).
Sampling System:
Sampling System:
Sampling System:
Sampling System:
Sampling System:
Wetted parts: 304 welded stainless
steel.
Sensitivity:
Sensitivity:
Sensitivity:
Sensitivity:
Sensitivity:
1% of low range.
Accuracy:
Accuracy:
Accuracy:
Accuracy:
Accuracy:
+2% of low range.
Response and Recovery Time:
Response and Recovery Time:
Response and Recovery Time:
Response and Recovery Time:
Response and Recovery Time:
90% in less than 1 minute (for lowest
range).
Operating Temperature Range:
Operating Temperature Range:
Operating Temperature Range:
Operating Temperature Range:
Operating Temperature Range:
+40 °F to +120 °F (+5 °C to +49 °C).
Sample Requirement:
Sample Requirement:
Sample Requirement:
Sample Requirement:
Sample Requirement:
Flow: 150 cc/min.*
Pressure:
1 to 150 psig.
Temperature: +60 °F to +100 °F
(+15 °C to +38 °C)
Power Requirement:
Power Requirement:
Power Requirement:
Power Requirement:
Power Requirement:
115 VAC, 50/60 Hz, 150 W (other
voltages available.)
Alarms:
Alarms:
Alarms:
Alarms:
Alarms:
Adjustable single or dual alarm (op-
tional) setpoints.
Recorder Signal Output:
Recorder Signal Output:
Recorder Signal Output:
Recorder Signal Output:
Recorder Signal Output:
Voltage: 0-1 VDC or less.
Current: 1-5, 4-20, 10-50 mADC
(optional.)
Local Readout:
Local Readout:
Local Readout:
Local Readout:
Local Readout:
Digital or analog meter.
*
Specified flow rate required only during calibration. Measuring
cell is not sensitive to changes in flow rate.