Transcend Information TS0MFLRD6E - Manual (Page 7)

5
R
e
d
W
hi
te Gr
e
en
Bl
ack Th
ic
k
B
la
ck
1
2
3
4
5
10
9
8
7
6
5. If the layout of USB pin-header does not match the default setting of USB connector
(shown above), rearrange the color wires of the USB cable as follows:
a. Use a needle to raise the small plastic tab and pull the color wires out of the
connector. Be careful not to break the tab.
PU
LL
Plug the USB connecter with the red
wire seated in pin 1 or pin 6.