TOA Electronics CP-66 - Manual (Page 113)

Selected Paging
The Selected Paging permits simultaneous paging of
arbitrary stations or zones selected freely at a master
station. It is broadly divided into two classifications:
Individually Selected Paging and Matrix Selected Paging.
Each function offers the following paging modes.
A. Individually Selected Paging.
This function is used when simultaneously paging multiple
individual stations or zones.
(1) Selected Station Paging
A group of selected stations can be paged within an
independent system, including tie-line systems
connected by means of the TI-62.
(2) Selected Zone Paging
A group of selected zones can be paged within an
independent system, including tie-line systems
connected by means of the TI-62.
(3) Selected Rented Line Station Paging
A group of selected stations can be paged over separate
exchange systems connected using the TI-600 via
rented lines.
(4) Selected Rented Line Zone Paging
A group of selected zones can be paged over separate
exchange systems connected using the TI-600 via
rented lines.
(5) Selected Global All-Call Paging
All-call paging can be provided over separate exchange
systems connected using the TI-600 via rented lines. The
system having the station that has paged is also
covered.
A. Individually selected paging
1. Selected station paging and response
[Paging]
First dial
and then (station No.)
After dialing station Nos., press
A maximum of 20 stations can be paged simultaneously.
However, the number decreases depending on the
number of available links.
When any one station in a paged group is busy, this
function cannot be used.
[Response]
To respond, dial
2. Selected zone paging and response
[Paging]
First dial
and then (zone No.).
After dialing zone Nos., press
A maximum of 20 zones can be paged simultaneously.
However, the number decreases depending on the
number of available links. When any one zone in a paged
group is busy, this function cannot be used.
[Response]
To respond, dial
covered.
(6) Selected External All-Call Paging
This is the same as the Global All-Call Paging except that
the system having an operating station is not covered.
B. Matrix Selected Paging.
This function is used when paging one same group of
selected stations or zones simultaneously over separate
exchange systems connected using the TI-600 via rented
lines.
(1) Global Matrix Station Paging
One same group of selected stations can be paged over
separate exchange systems simultaneously. The system
having an operating station is also covered.
(2) External Matrix Station Paging
This is the same as the Global Matrix Station Paging
except that the system having an operating station is not
covered.
(3) Global Matrix Zone Paging
One same group of selected zones can be paged over
separate systems simultaneously. The system having an
oeprating station is also covered.
(4) External Matrix Zone Paging
This is the same as the Global Matrix Zone Paging
except that the system having an oeprating station is not
covered.
Any station
No.
Any station
No.
Any station
No.
Station paging
Any paging
zone No. Any paging
zone No. Any paging
zone No.
Zone paging
—106—