TOA Electronics C-RM1000 CU - Manual (Page 33)

33
11. OTHER OPERATIONS
11.1. Log-In and Log-Out
If a password has been set, it is possible to log in to or log out of each operation level by following the
procedures below. For password settings, please refer to
p. 46 ; Password. For the Digital Video Recorder’s
login and logout method, refer to p. 32 ; Entering the Digital Video Recorder Password.
11.1.1. Log-in
1. Hold down the Menu key for 2 seconds or more.
The “PASSWORD” indication is displayed on the LCD screen.
Note
Holding down the Menu key for 2 seconds or more when set to
the lowest operation level immediately displays the password
entry screen.
2. Select LOGIN using the joystick and press the SET key.
The password entry screen is displayed.
3. Enter one of password 1-3, and press the SET key.
Access is given to the operation level corresponding to the
entered password. (Refer to
p. 46 ; Password.)
11.1.2. Log-out
1. Hold down the Menu key for 2 seconds or more.
The “PASSWORD” indication is displayed on the LCD screen.
Note
Holding down the Menu key for 2 seconds or more when the
operation level is set to Level 1 displays the screen for selecting
either “LOGOUT” or “RM MENU”.
2. Using the joystick, select LOGOUT, then press the SET key.
The system logs out to the lowest set operation level. (Refer to p.
46 ; Password.)
P A S S W O R D
L O G I N
P A S S W O R D
_ _
P A S S W O R D
P A S S W O R D
L O G O U T
MENU
SHIFT
MENU
SHIFT