TOA Electronics C-RM1000 CU - Manual (Page 14)

14
CAM
CAM MENU
7 1 1 5
LCD screen
DVR MON CAM POS
Camera No.
displayed on the full screen
7.3. Camera Selection
Select the camera to be displayed or operated.
1. Press the camera number to be selected using the ten-key
numerical pad.
2. Press the CAM key.
The selected camera number is displayed on the LCD
screen (CAM section).
5 1
[Example]
7.3.1. Quick group camera selection (available only when cascade-connected)
Specified cameras within the group can be selected using straight number entry. The selected camera images
are displayed in full-screen through the Monitor Output 1. Select the camera's serial number referring to the
system example below.
Note: Group settings must be performed in advance. (Refer to p. 40 ; Group Settings.)
CAM
CAM MENU
G 1 1 2 6
LCD screen
DVR MON CAM POS
1. Enter the serial number for the camera you want to select
using the ten-key numerical pad during group selection.
Select the 10th camera connected to the Digital Video
Recorder 2 as in the system example. In a serial
numbering system, the 10th camera connected to the
Digital Video Recorder 2 becomes No. 26 by counting 16
cameras connected to the Digital Video Recorder 1 and 10
cameras connected to the Digital Video Recorder 2 (16 +
10 = 26).
2. Press the CAM key.
The selected number is displayed on the LCD screen
(CAM).
6 2
[Example]
16-channel DVR 1 Remote Controller
16-channel DVR 2
10th
Combination Camera
10
1-16
( System example ) Group 1