Technicolor - Thomson DTH210E - Manual (Page 21)

EN EN
21
1. Select the Lock Player line and press OK to validate.
2. You are requested to enter a “new password”. Enter your four-digit number (1) using the remote
control number keys, then press OK to validate.
3. You are requested to confirm. Repeat the operation.
• To disable the lock, select the Unlock Player line and press OK to validate.
• To change your password, select the Change Password line and press OK to validate. Enter your
new 4-digit code. Enter it once more to confirm.
Choose the rating limit: select Rated Titles then press OK to validate. Select the level using the
Navigation keys, then press OK to validate.
• Non-indexed titles can all be freely accessible or require a password:
select Unrated Titles then press OK to validate. Select “ Free Access” or “Password Required”
then press OK to validate.
l
ock
To enable the Lock Player function, you must enter a password. The Ratings Limits function
enables you to control the type of discs or programs that your family can watch. If certain discs
contain information or scenes that exceed the rating limit you’ve set, they will not be played.
There are 8 rating levels.
This function is only available on DVDs for
which the publisher has set a rating limit. It
therefore depends on the disc. In Europe, very few discs have rating limits.
Choose a four-digit number that you will be able
to remember easily or note it down. • If you’ve forgotten your password, consult the
Troubleshooting guide at the end of this
manual (
k page 25).
DVD - lock Player
DVD - Ratings limits (1)
Navigation
keys
1.
1.
1.
Load a disc and press STOP . The player menu
appears.
1. select Lock using the Navigation keys,
2. press OK to validate,
3. select a function using the Navigation keys,
4. adjust the setting using the Navigation keys.
DTH210E_EN 22/03/02 10:49 Page 21