beautypg.com

Ound menu, Sound logic, Digital audio output – Technicolor - Thomson DTH210E User Manual

Page 13: Virtual surround (srs, Trusurround)

background image

EN

EN

and the

symbol are

registered trademarks of SRS Inc. The
TruSurround

TM

technology is manufactured

under license from SRS Inc.

When the player menu is displayed
(in stop mode):

1.

select

Sound using the

Navigation

keys,

2.

press

OK

to validate,

3.

select a function using the

Navigation

keys,

4.

adjust the setting using the

Navigation

keys.

13

S

ound menu

Sound Logic

This function is designed for night-time listening to avoid disturbing your neighbours. The player
then adjusts the differences in sound levels through dynamic compression. It then becomes easier to
hear the soft sounds while the louder sounds are dampened.

• Select

Sound then Sound Logic and switch the function to On.

Digital audio output

Depending on the amplifier or television (with or without integrated decoder) connected to your
DVD player, you will need to set the DIGITAL AUDIO OUT socket (coaxial) so that they deliver the
Dolby Digital

(2)

or DTS

(3)

digital signals supported by the other device

(4)

.

• Select

Digital Output, and then check that either

Dolby Digital

or

DTS

is ticked.

Virtual Surround (SRS

(1)

- TruSurround)

This function provides you with virtual reproduction of the multichannel sound of a Dolby or DTS
film onto the two channels of your TV or stereo amplifier. The sound effects of a 5.1 system are then
simulated.

• Select

Sound then Virtual Surround and switch the function to On.

Dolby Digital is a sound

compression technique elaborated by Dolby
Laboratories for digital audio multichannel
signals. The Dolby Digital system enables any
audio channel configuration, from a stereo
sound (2 channels) up to the digital “surround”
sound 5.1.
«Dolby Digital» and the double-D symbol are
trademarks of Dolby Laboratories Licensing
Corporation. Copyright 1992 Dolby
Laboratories Inc. All rights reserved.

PCM

If the device connected to the DIGITAL AUDIO

OUT socket does not support Dolby or DTS
signals, your player will deliver PCM (Pulse
Code Modulation) signals. In that case, neither
Dolby Digital, nor DTS must be ticked.
The linear PCM is a signal recording format
used for CDs. CDs are recorded in
44.1kHz /16bits. DVDs are recorded in 48kHz /
16 bits, or even up to 96kHz / 24 bits.

DTS is a digital sound compression
technique developed by Digital Theater

Sound Systems for digital audio multichannel
signals.
"DTS" and "DTS Digital Out" are registered
trademarks of Digital Theater Systems inc.

DIGITAL OUT

The Sound menu provides you with settings so you can adapt your player to the devices
connected. It also enables you to access specific functions.

2.

3.

4.

1.

Navigation
keys

DTH210E_EN 22/03/02 15:37 Page 13