Technicolor - Thomson MS6000 - Manual (Page 19)

14
Tuner
EN Selecting Tuner
1. Press SOURCE to select TUNER.
2. Press BAND to select between FM/MW/LW radio
band.
Tip: Your audio system has 32 preset stations.
Tuning to a Station
Press DIGITAL TUNING or on the main
unit or TUNE REW /TUNE F FWD on the
remote control to select frequencies.
Using Presets
The tuner can be either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press
TUNE/PRESET on the main unit to toggle
TUNE and PRESET mode.
• Press DIGITAL TUNING or on the main
system or PRESET PREV or PRESET NEXT
on the remote control to access the previous or
next preset station. The display first shows the
preset program number and after a few seconds,
the frequency will be displayed. (FMPR:01 is FM
preset 1)
Auto Preset Programming (for FM only)
Press and hold BAND/AUTO PROG./DECK1•2 button
for 2 second to scan stations in the selected band. The
stations will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is automatic
upon pressing the button.
You can stop the automatic scan by pressing any but-
ton, but the erased stations cannot be recovered.
Manually Setting Presets
1. Press TUNE•PRESET to enter TUNE mode.
2. Press DIGITAL TUNING
or to access
the desired frequency.
3. Press the PROG•SET button once.
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
DIGITAL TUNING or to move to the
desired preset number (1-32).
6. Press PROG•SET to store the selected frequency at
that preset.
Suppressing Stereo Signal
Press CD INFO/ FM ST on the remote control to
toggle between FM mono and stereo for stereo FM
stations.
Tuning to an RDS Station
Tip: RDS stations broadcast on FM only. When the
tuner detects an RDS signal, the RDS icons turns
on.
1. Press TUNE•PRESET to access preset station or
press DIGITAL TUNING or to
desired frequency.
2. If RDS station found, RDS lights on display with
station name shown.
Displaying RDS Station Information
Press CLOCK/RDS on the main unit or REPEAT/RDS
on the remote control to display the frequency, sta-
tion name (PS), station type (PTY), clock time (CT), or
radio text (RT). In CT mode, press INTRO/CT key to
replace the displayed time by RDS station time. If
clock time is not yet set, this information will be
shown as clock time automatically.
Searching by Program Type (PTY)
(Remote Only)
1. Press /PTY to enter PTY selection
2. Toggle /PTY to select a PTY mode.
3. Within 5 seconds, press DIGITAL TUNING
or
to search for a station broadcasting the
selected type of program.
You can search for stations using one of
the following program types:
RDS NEWS (news), AFFAIR ( news and documentaries),
INFO (weather, medical), SPORT (sports),
EDUCAT (education), DRAMA (series and plays),
CULTUR (religion), SCIENC (science and technology),
VARIED (miscellaneous), POP M (pop music),
ROCK M (rock music), MOR M (middle-of-the road
music), LIGHTM (light music), CLASSI (classical music),
OTHERM (unclassified music), ALARM (alarm).
MS6000 EN 4/2/03 3:14 PM Page 19