beautypg.com

Settings, En 6, Showing the demonstration – Technicolor - Thomson MS6000 User Manual

Page 11: Setting clock / timer, Activating the timer

background image

EN

6

Settings

Showing the Demonstration

Magic demonstration is available in all modes except
for when timer is on or sleep mode is
activated. Press DIMMER/DEMO to turn on/off
magic demonstration mode. The demonstration
scrolls through all display operations.

Setting Clock / Timer

Setting the Clock

1. Press and hold CLOCK/RDS until the hour flashes

on the display. CLOCK SET will show on the
second row of the display to indicate you are
currently in clock setting mode.

2. Press

DIGITAL TUNING

or on the

main unit or PRESET / PREV

or

PRESET / NEXT

on the remote control to

select the hour.

3. Press CLOCK/RDS to shift to minute digits.
4. Follow step 2 to set the minute digits.
5. Press

PROG.•SET to confirm and save settings.

Press STOP to quit setting.

Note: When system is ON, you can press CLOCK/RDS

to display the current time (CURR TIME) for about 2

seconds.

Setting the Timer

1. Press and hold TIMER until ON 0:00

appears with the hour flashing (ON - timer on
time). ALARM SET will show on the second
row of the display to indicate you are currently in
timer setting mode.

2. Press

DIGITAL TUNING

or on the

main unit or PRESET / PREV

or PRESET /

NEXT

on the remote control to select the

hour.

3. Press

TIMER to shift to minute digits.

4. Repeat step 2 to select minute digits.
5. Press

TIMER to shift to timer off time setting.

6. OF 0:00 (timer off time) will show on

the display with hour flashing. Repeat steps 2 - 4
for timer off time setting.

7. Press

TIMER to select source.

8. Press DIGITAL TUNING

or on the main

unit or PRESET / PREV

or PRESET / NEXT

on the remote control to select between CD
MODE /TUNER / TAPE/ REC TU.

8. Press TIMER to set volume.
9. Rotate

the

VOLUME CONTROL knob on the

main unit or press VOL + or VOL - on the remote
control to set desired volume level.

10. Press PROG.•SET to confirm and save settings.

Press STOP

to quit setting.

Activating the Timer

Press and release TIMER to activate and deactivate
the timer.

will lit when the alarm is active.

0:00

CLOCK SET

ON 0:00

ALARM SET

MS6000 EN 4/2/03 3:14 PM Page 11