Basic functions, Turning the explorist receiver on, Turning the explorist receiver off – Thales Navigation CGRS User Manual
Page 6: Setting the display backlight, Adjusting the contrast

4
Turning the eXplorist Receiver On
Press Power. (Press
and hold for 2 - 3
seconds.)
After the eXplorist receiver successfully computes your present
position, the last viewed navigation screen is displayed.
Turning the eXplorist Receiver Off
Press Power.
Setting the Display Backlight
Press Light.
The display backlight is a large drain on the receiver’s
batteries.
Adjusting the Contrast
From any screen, press
Menu. Use the joystick to
highlight Contrast and
press
Enter.
Press
Enter.
A shutdown
sequence begins. To
cancel power off,
press
Escape.
Each time you press the Light button, the
display backlight changes from low to
high and back to off.
Use the
joystick to
adjust the
contrast to the
desired level.
Press
Escape when
done.
Basic Functions