beautypg.com

Care and cleaning – Tricity Bendix SIE 225 User Manual

Page 18

background image

18

ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY AT THE MAIN WALL SWITCH AND
ALLOW

THE

APPLIANCE

TO

COOL

BEFORE CLEANING.

CLEANING MATERIALS

Before

using

any

cleaning

materials

on

your

appliance, check that they are suitable and that their
use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Harsh abrasives
should also be avoided.

CLEANING THE BRASS PLATED HANDLES

(Where applicable)

It is strongly recommended that only hot soapy water
is used for cleaning the handles.

ANY OTHER

CLEANING MATERIALS WIL DULL THE BRASS
PLATED FINISH.

CLEANING

THE

OUTSIDE

OF

THE

APPLIANCE

DO

NOT

use

abrasive

cleaning

materials,

or

scourers on the outside of the appliance as some of
the finishes are painted and damage may occur.
Regularly wipe over the control panel, splashback,
oven doors and cooker sides using a soft cloth and
liquid detergent.

DO NOT ATTEMPT TO REMOVE ANY OF
THE

CONTROL

KNOBS

FROM

THE

PANEL AS THIS MAY CAUSE DAMAGE
AND IS A SAFETY HAZARD.

CLEANING THE SEALED HOTPLATES
AND HOTPLATE TRIMS

In

order

to

maintain

the

appearance

of

your

appliance's sealed hotplates and trims, you are
advised to use the recommended cleaning agents
daily. If you do not allow spillages to burn on they
will be much easier to clean off.

THINGS TO NOTE

The red spot in the centre of the hotplates may be
removed with some abrasive cleaning agents. This
is not a fault and does not affect the performance of
the hotplates.

FOR NORMAL SOILAGE

Wipe over the hotplates and trims using a clean
damp cloth then switch to a low or medium setting for
a few minutes to thoroughly dry.

FOR HEAVY SOILAGE

Use a clean damp cloth or scourer with a cream
cleaner e.g. ‘Cif’ or a powder cleaner e.g. ‘Ajax’ on
the hotplate and trims. Follow the circular grooved
pattern on the hotplate when cleaning.

Rinse off

cleaning agents thoroughly.

Dry as for normal

soilage.

For more stubborn marks warm the hotplate on a low
setting for 30 seconds. Clean the sealed plate with
‘Ajax’ powder cleaner, ‘Cif’ cream cleaner or a ‘Brillo’
pad. You may have to rub hard for several minutes.

Rinse off cleaning agents thoroughly with a damp
cloth. Switch to a low or medium setting for a few
minutes until the hotplate is thoroughly dry.

CLEANING THE HOTPLATE TRIMS

The stainless steel trims may become straw coloured
during use.

Using a proprietary stainless steel

cleaner, e.g. ‘Shiny Sinks’ will help maintain a bright
appearance. Alternatively a powder cleaner such as
‘Bar Keepers Friend’ may be used regularly.

CLEANING THE VITREOUS ENAMEL

Use a clean damp cloth or scourer made for non-
stick saucepans with ‘Cif’ or cream cleaner.

CARE AND CLEANING