Technicolor - Thomson TV/DVD - Manual (Page 28)

GB
21
TV
DVD
More info...
Select the connected equipment with the av key of the remote control. Press once for AV1, twice for AV2, or three times for AV3.
For some sources, the AV1 or AV2 selection is automatic (slow or fast switch).
Connections
READING RECORDING CALL
Device Socket Device Socket PROGRAMME
Video recorder Video recorder
SCART or SCART AV1
AV1 Camcorder AV2
Camcorder
Cinches Video recorder
SCART or or
AV2
AV3
S-Video Camcorder
AV3
The AV1 socket (SCART input-output), located at the rear of the TV/DVD set, enables
you to connect another device ( VHS or 8 mm or DVHS video recorder,VHS or 8
mm camcorder, decoder, satellite receiver, DVD player, video games console or
equipment outputting an RGB signal).
The AV2 socket (SCART input / output) at the rear of the TV/DVD can be used to
connect a camcorder as well as an amplifier by means of a SCART-to-Cinch cable.
AV3 (cinch sockets and S socket: inputs only): on the front or on the side of the TV/DVD
set.The cinch audio and video sockets enable you to connect a VHS or 8 mm camcorder.
The S socket and the cinch audio sockets enable you to connect a S-VHS or Hi 8
camcorder or a digital DVC camcorder.
Select the connected device with the av key of your remote control to display AV3 on
the screen. Upon switching off of the connected device, the TV/DVD will remain on the AV3
programme. To return on a channel, enter its number with the remote control.
Headphones: connect stereo headphones or earphones to the n n socket.According to
the models, you will or will not have to mute the loudspeakers with the key.Adjust
the sound with Vol + or - .
DVD output sockets cinch socket, S socket and digital-audio socket: output only): to the
rear of the TV/DVD set.
To connect a video recorder or a TV set, use either the cinch audio and video sockets, or
the S socket and cinch audio sockets.
The cinch audio sockets also enable you to connect a stereo amplifier, a Hi-Fi unit, a
Dolby Prologic amplifier/decoder.
The
DIGITAL AUDIO socket enables you to connect a Dolby Digital (AC-3)
amplifier/decoder. Do not forget to check the type of sound in the Sound menu of the
DVD part (see page 15).
To copy a cassette: Connect the recording VCR on the AV2
scart socket. Connect the reading device on the AV1 scart socket
if it is a VCR or on the AV3 cinch sockets if it is a camcorder.
Connection of a video recorder (see diagram at the end of
the leaflet, inside the cover) - If you connect a video recorder to the
aerial socket, you will have to search and memorise the video
recorder modulator channel. Switch the video recorder on, insert a
recorded cassette to be read and search for images (see Chapter
“Completing set-up” on page 5).
Store at any programme ending with a 9 (9, 19, 29 etc...).
Each time you use the video recorder, switch to the programme
assigned to it.
AV1/AV2: in DVD mode, the signal output from the AV1 and AV2
sockets is identical to the display on the TV/DVD screen.
In TV mode, the signal output from the AV1 is always that of the
received channel.The signal output from the AV2 socket is identical
to the display on the TV/DVD screen.
In accordance with the DVD standard, your TV/DVD is equipped with a Copy Protection Device, which
can be triggered on and off by the DVD disc itself, in order to make any recording of the concerned DVD
disc onto a videotape of very poor picture quality, or even impossible.
“This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home use only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.”
The player's digital audio (optical) output jack fully
comply with the international standard governing this type of
jack (IEC 958).It is designed exclusively for connection to a
Dolby Digital (AC-3) or a suitable decoder.
Do not use the Digital Audio Output jacks to connect to an
equipment other than a Dolby Digital (AC-3) or a suitable decoder.
Such a connection can create a high level of noise that may
be harmful to your ears, and could damage headphones or
speakers.
Older digital equipment, some of which are not fully compliant with
IEC 958, are likely to cause this problem.To avoid this drawback,
use the «audio-digital output» menu (see page 15) to convert the
Dolby Digital (AC–3) audio-digital output from bit to linear PCM
flux.
L. R.
AUDIO
VIDEO
S
These sockets are located on the side.
AV3
Headphones
These sockets are located on the back of the
TV/DVD.
They deliver the video and audio
signals coming from the DVD player
part.
S.
VIDEO
DIGITAL AUDIO
AUDIO
L R
c20dGB7L 19/07/00 18:03 Page 21