Top Innovations SF-220 - Manual (Page 11)

11
Removing Mineral Buildup Procedure
As with any steam appliance, mineral build-up may occur in the boiler. If
you are not using distilled or de-mineralized water we suggest you follow
this procedure monthly.
1. Perform steps 1-5 of the Cleaning and Storage Procedure.
2. Prepare a mixture of 50% white vinegar and 50% water in the Measur-
ing Cup. Pour the mixture into the Boiler.
3. Let stand for 45 minutes. Note: Do not plug the unit in while it is
filled with the vinegar-water mixture.
4. Drain the vinegar-water mixture from the Boiler.
5. Flush the Water Reservoir with fresh water and drain until no vinegar
smell remains. You may need to repeat this step several times.
Specifications
Input Voltage 120 VAC
Input Frequency 60 Hz
Output Power 900 W
Water Capacity 6 oz 180 ml
Troubleshooting Guide
PROBLEM CAUSE SOLUTION
Unit fails to heat Steamer not plugged in Plug into electrical outlet.
Household Circuit
Breaker Tripped or Fuse
Blown
Reset the circuit breaker
or replace the fuse. If you
need assistance contact a
qualified electrician.
Steam Cleaner heats up
but there is no steam out-
put.
Unit needs water.
Follow the Water Filling
Instructions.
Steam outlet blocked. Discontinue using the
unit. Place a Service Call.