Tally Genicom 9316 - Manual (Page 62)

Solving Problems-Printing Quality 56
There is insuf-
ficient fusing
or the image
comes off
when rubbed. The media is moist from
humidity. Remove the moist media and
replace it with new, dry media.
Media with specifications not
covered by the printer warranty
is being used. Use media that is covered by
the printer warranty.
The media type may be incor-
rectly set. When printing envelopes,
labels, thick stock, and trans-
parencies, the appropriate
media type must be specified
in the printer driver.
Symptom Cause Solution