Topcom BUTLER 2700 - Manual (Page 12)

5.10.1 Setting the Flash time
Set the switch on the bottom of the base in the desired posi-
tion!
5.11 Setting the ring volume
Press the volume button a few times in standby until the
desired handset ring volume is heard.
Remark: The Base ring volume cannot be set!
6. CALLER-ID FUNCTION (CLIP)
The Butler 2700 displays the telephone numbers of incoming
calls. This function is only possible if you are subscribed to a
telephone operator that provides this service. Contact your
telephone provider for more information. When you receive a
call, the numbers are saved in a Call list. This list can hold
10 telephone numbers (each of max. 10 digits). If the num-
ber is longer then 10 digits, only the last 10 digits are shown
and stored!
6.1 New calls
When you’ve received a new unanswered call, the CLIP sym-
bol
appears on the display.
6.2 Consulting the Call list
When you consult the Call list, you will notice that the list
always starts with the last call received.
• Press the Call Log button
or the Up or Down
button.
• Use the Up and Down buttons to scroll through the
list. The Up key will skip backwards to the previous
record, the Down key will skip forward to the next
record.
• You can leave the Call list by pressing the R button.
12
Butler 2700/DUO
B2700_euro.QXD 24/6/02 9:09 am Pagina 12