Topcom BUTLER 2700 - Manual (Page 10)

• Press the Line button when you want to terminate the
call.
5.2 Incoming calls
• When a call comes in, the handset and base will start
to ring. The EXT symbol and the handset indicator LED
will blink.
• Press the Line button to answer the incoming call.
• When you pick up the handset from the base unit you are
immediately connected to the caller. You do not need to
press the Line button
.
5.3 Last number redial
• Press the Line button .
• Press the Redial button . The last number (with max. 20
digits) will be dialled automatically.
• Press the Line button when you want to terminate the
call.
5.4 Programming memory numbers
You can program 10 indirect numbers (of max. 20 digits) in
the phone’s memory.
• Press the Memory button
, followed by memory
location (0-9).
• Enter the telephone number you wish to save on this
memory location.
• Press the Memory button . You will hear a confirmation
tone.
Remarks :
•
If you wish to insert a pause, press the Redial/Pause button /P
on the location where you want a pause
5.5 Calling a memory number
• Press the Line button .
• Press the Memory button , followed by the number of
the memory location (0-9).
• The memory number will be dialled automatically.
10
Butler 2700/DUO
B2700_euro.QXD 24/6/02 9:09 am Pagina 10