Operation, Setting the time – Technicolor - Thomson EFC031 User Manual

Page 10

Operation

Setting the time

The

TIME

menu can be used to set the time on the TV set and program the automatic sleep timer or wake-up timer

functions.

Display the

OVERVIEW

menu by pressing the

MENU

button. Select the

Time

option and press

to confirm.

Setting the time
1.

Select the

Time reference

option.

Enter the number of the channel which the time will use as a reference point, or select it from the list using the

buttons.The time is displayed after a few seconds if it is available on the selected channel.

If the time is not provided by the channel selected under the

Time reference

option, this means the time is not set.

In this case, the setting

is automatically selected under the

Time

option. To set the time manually, select the

Time

option and enter the time using the numeric or

buttons.

If the date is not supplied by the channel selected on the

Time reference

line, the date is not adjusted.The --/--/--

setting is automatically preselected on the

Date

line.To enter a date manually, select the

Date

line and use the number

keys.

Note: if the power supply is disrupted (i.e. the set is switched off using the on/off button or unplugged, or there is an electrical fault), the time will
disappear if it has been entered manually.You must reset it. We therefore recommend you find the time on a channel and check that it is correct.

Once you have set the time, you can use the

Wake up timer

and

Turn off timer

functions.

Calendar

This function is used to display the calendar.

Select the

Calendar

line.

Press the

button to bring up the calendar.

Successively select the

Month

and

Year

lines and use the

buttons to select the current month and year.

Please note: you can set the calendar to any year between 1880 and 2099.

The

Today

line lets you bring back the display to the current month.To do so press the

buttons or the

button.

This line is only active if the date has been set in the

TIME menu.

Programming the wake-up timer

This function can be used to set the time for the set to come on, for instance, for the television to wake you up.

Select the

Wake up timer

line and select

Once

to be woken-up a single time or

Daily

to be woken up at the same

time every day.

Note: to deactivate wake-up, select the

Off option.

Under the

Wake up time

option enter the wake-up time using the numeric or

buttons.

Under the

Wake up channel

option enter the number of the channel you want to wake you using the

numeric buttons.

Note: if you have programmed a wake-up and are not there when the appliance comes on, it will automatically switch off after two hours if no
activity using the buttons on the front of the set or the remote control has been detected.

Schedule automatic shut-off

This function lets you set a time when the appliance will switch itself off.

Select the

Turn off timer

line then select

Once

for a single stoppage or

Daily

for shut-off at the same time every

day.

Note: to deactivate automatic shut-off, select the

Off option.

On the

Turn off time

line, enter the shut-off time using the number buttons or the

buttons.

Programme a sleep time

This function is used for setting a sleep timer.

Select the

Sleep timer

line.

Using the

buttons, set how long the TV set must wait before automatically going into standby mode (from 0:15

hours to 4:00 hours in 15 minute intervals).To deactivate this function, set it to

Off

06-EFC031-EN.qxd 4/07/05 18:45 Page 10