TAG MIL-BOOK 200 - Manual (Page 78)

Expanding Your Computer 4-13
3. Remove the long rubber cushion on the left side and two short rubber
cushions on the right side.
4. To install the SO-DIMM, match the SO-DIMM's notched part with
the socket's projected part and firmly insert the SO-DIMM into the
socket at a 20-degree angle. Then push down until the retaining clips
lock the SO-DIMM into position.
5. Replace the long rubber cushion on the left side and two short rubber
cushions on the right side.
6. Replace the SO-DIMM compartment cover and secure with ten
screws.
7.
2 short rubber cushions 1 long rubber cushion