TOA Electronics N-VR2010 - Manual (Page 8)

8
Software Decoder
N-SD2000
Network Combination
Dome Camera
N-CC2564
Network Color Camera
N-CC2360
To 24V AC
Network Video Receiver
N-VR2010
Monitor
Network Video Transmitter Network Video Transmitter
N-VT2010
Network Video Recorder
N-DR2000
PoE compatible
switching HUB
Analog
CCTV system
To AC mains
To AC mains
1 2 3 4 5 6 7 8 DC-IN
Combination Dome Camera
: Coaxial cable
: 10BASE-T/100BASE-TX
: 100BASE-TX/1000BASE-T
N-VT2010
H D D
DEO NETWORK V I
ER RO R
N- RECORDER
PO W ER
DR2000
TM
RS-485
To 24V AC
6. SYSTEM CONFIGURATION
The connection of a basic system is shown below.
The analog CCTV system is comprised of conventional cameras and switchers.
When using a PoE-compatible hub, the power supply need not be connected to the N-VT2010 Network Video
Transmitter, N-VR2010 Network Video Receiver and N-CC2360 Network Color camera. When using a hub not
supporting PoE, power must be independently supplied to each device. Connect the AC mains to N-DR2000
Network Video Recorder.
Connect 24V AC to the N-CC2564 Network Combination Dome Camera.