beautypg.com

Install menu – Technika 32-2010 User Manual

Page 22

background image

English - 21 -

Menu Background

Press “ ” or “ ” button to select

Menu Background.

You can set menu background level by pressing “

” or “ ” button.

Power Save Mode

Use “ ” or “ ” button to select Power Save Mode.
Press “ ” or “ ” button to set Power Save Mode as

On or Off.
See the section, “Environmental Information” in

this manual for further information on Power Save

Mode.
Note : Backlight function will be invisible if Power Save

Mode is set to on.

Backlight

This setting controls the backlight level. Select

Backlight by pressing “ ” or “ ” button. Press“

” or “ ” button to set

Backlight to Auto, Medium,

Maximum or Minimum

.

Menu Timeout

To set a specific display timeout for menu screens,

set a value for this option.
Press “ ” or “ ” button to select

Menu Timeout. Use

“ ” or “ ” button to change menu timeout to

15 sec,

30 sec or 60 sec.

Teletext Language

Press “ ” or “ ” button to select

Teletext Language.

Use “ ” or “ ” button to change

Teletext Language to

West, East, Turk/Gre, Cyrillic, Arabic or Persian.

HDMI PC Full Mode (optional)

If you want to view PC screen in HDMI mode by using

external connection, HDMI PC FULL MODE option

should be On to adjust the screen ratio correctly. This

item might be inactive in some resolutions.

Note: If you connect an HDMI device and switch the

TV to HDMI mode, this feature will be visible (except for

1080i/1080P resolution).

Full Mode (optional)

If you connect a device via HDMI or YPbPr connectors

and set 1080i/1080P resolutions, Full Mode item will

be visible.You can set Full Mode as 1:1 or Normal

by using “ ”or “ ”.If you select 1:1, screen ratio will

be adjusted correctly. If you set Normal, screen ratio

may expand.

Ext Out

Press “ ” or “ ” button to select Ext Out. Use “ ” or

“ ” button to set the Ext Out as On or Off.

Note:
For copying from a DVD or VCR device, you should choose

desired source from source menu and turn “On” to EXT Out

from feature menu.

Ext Out should be On in order to use Timers function in the
DTV mode.

Install Menu

Programme

Press “ ” or “ ” button to select Programme. Use

“ ” or “ ” button to select the programme number.

You can also enter a number using the numeric

buttons on the remote control. There are 200

programme storage between 0 and 199.

Band

Band can be selected either C or S. Press “ ” or “

” button to set Band.

Channel

Channel can be changed by “ ” or “ ” button or

numeric buttons.

Colour System

Press “ ” or “ ” button to select Colour System. Use

“ ” or “ ” button to change the colour system to PAL,

PAL 60, SECAM or AUTO.

Sound System

Press “ ” or “ ” button to select Sound System.

Press “ ” or “ ” button to change the sound system

to BG,DK, I, L or L’.

Fine Tune

Press “ ” or “ ” button to select Fine Tune. Press “

” or “ ” button to adjust the tuning.

Search

Press “ ” or “ ” button to select Search. Use “ ”

or “ ” button to start programme searching. You can

also enter the desired frequency using the numeric

buttons while Search item is highlighted.

Store

Press “ ” or “ ” button to select Store. Press “ ”

or

OK button to store the settings. “Stored...” will be

displayed on the screen.