Toshiba B-EV4T SERIES - Manual (Page 7)

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33087
1.1 Introduction
E1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
1.3 Unpacking
1.4 Accessories
Thank you for choosing the TOSHIBA B-EV4T series barcode printer.
This Owner’s Manual contains valuable information from general set-up
to confirming the printer's operation using test prints. You should read it
carefully to help you gain maximum performance and life from your
printer. This manual should be kept close at hand for everyday reference.
Please contact your TOSHIBA TEC representative for further
information concerning this manual.
This printer has the following features:
Various kinds of interface
Various kinds of interface are provided as standard:
Parallel Serial
USB Ethernet
Simple mechanism
The simple printer mechanism allows easy operation and maintenance.
Superior hardware
Clear print is realized by 8 dots/mm (203 dpi) (for the B-EV4T-GS14)
print head at maximum printing speed of 127 mm/sec. (5 inches/sec.) or
11.8 dots/mm (300 dpi) (for the B-EV4T-TS14) print head at a max.
printing speed of 101.6 mm/sec. (4 inches/sec.)
Safety consciousness
The damper mechanism prevents the top cover from slamming shut.
A variety of options
The following optional devices are available:
Cutter module AC Adapter Cover
Strip module External Media Hanger
1. Unpack the printer.
2. Check for damage or scratches on the printer. However, please note
that TOSHIBA TEC shall have no liability for any damage of any
kind sustained during transportation of the product.
3. Keep the cartons and pads for future transportation of the printer.
When unpacking the printer, please check that the following accessories
are supplied with the printer.
CD-ROM (1 copy) Power Adapter (1 pc.)
Supply Loading Instructions Safety Precautions