Tributaries HDMI HXC6IR - Manual (Page 3)

To double your maximum distance, add the Tributaries HXC6R Repeater
(optional). This passive device can be inserted at the end of the appropriate
length of CAT6 cable run from the Tributaries HXC6IR transmitter unit. A similar
length of CAT6 can be run to the Tributaries HXC6IR Receiver unit. The HXC6R
supports all the features of the HXC6IR.
It is possible to substitute CAT5E cable for the CAT6. However, the maximum
resolution capability will be limited to 1080p/8 bit color, HDMI v1.2.
All units are HDMI v1.3 certified supporting 12 bit Deep Color and new lossless
compressed Digital Audio: Dolby TrueHD®, Dolby Digital Plus and DTS®-HD
Master Audio with a bandwidth up to 2.25 GHz.
2. Features
Extends 12 bit color 1080p resolution up to 20 meters over dual CAT6. •
Extends 8 bit color 1080p resolution up to 45 meters over dual CAT6. •
Supports IR signal transmission from remote source to display over same dual CAT6. •
Supports the full range of IR frequencies from 20-60KHz. •
Supports new lossless compressed Digital Audio like Dolby TrueHD, Dolby Digital •
Plus and DTS-HD Master Audio.
Equalization and timing of incoming TMDS data signal prior to re-transmission.
•
Supports HDMI input and output cables up to 15 meters. •
CAT6 can be cascaded using Tributaries HXC6IR repeater for greater distance. •
Compliant with HDMI 1.3 HDCP 1.1 and DVI 1.1 standards. •
Supports CEC bypass. •
Supports xvYCC. •
3. Package Contents
HXC6IR-TX Transmitter •
HXC6IR-RX Receiver •
IR receiver cable •
IR blaster cable •
Two 5V/1A universal power supplies •
Operation manual •
2