Perreaux SM6/P - Manual (Page 16)

16
Note: Balance settings are not stored, should the SM6 be turned off at the
mains power switch.
Tuner Source Select
Depressing this control selects the Tuner source input and the relevant code-set.
The Tuner input is indicated by “TU” on the display of the SM6.
Compact Disc Source Select
Depressing this control selects the Compact Disc source input and the relevant
code-set. The Compact Disc input is indicated by “Cd” on the display of the
SM6.
Tape Source Select
Depressing this control selects the Tape source input. The Tape input is
indicated by “TA” on the display of the SM6.
VCR Source Select
Depressing this control selects the VCR source input. The VCR input is
indicated by “VR” on the display of the SM6.
Laser Disc Source Select
Depressing this control selects the Laser Disc source input. The Laser Disc
input is indicated by “Ld” on the display of the SM6.
Auxiliary Source Select
Depressing this control selects the Auxiliary source input. The Auxiliary input
is indicated by “AX” on the display of the SM6.
Volume Up
Depressing this button increases the volume.
Volume Down
Depressing this button decreases the volume.
Note: The Volume control has a ‘punch through’ function and will operate
regardless of the code-set selected i.e. You can be operating the CD
player remote functions and still use the volume controls without
selecting the button first.