beautypg.com

TAG Player System User Manual

Page 16

background image

• RELD: <##> - Number of reloads available for each player.

Each reload gives you 10 additional tags. This value can be

anywhere from 0 to 99, or unlimited (“UL”).

• MEGA: <##> - Number of Mega-Tags available for each

player. This value can be anywhere from 0 (no Mega-Tags

allowed) to 99, or unlimited (“UL”), but can never be greater

than the total number of tags.

• SHLD: <##> - Total seconds of shield time available for each

player. This value can be anywhere from 0 (no shield time

allowed) to 99 seconds.

• TAGS: <##> - Number of Tags each player can take until

they are tagged out. This can be any number from 1 to 99.

5.

Program the functions for the game using the INC. and

DEC. buttons to increase or decrease the value or to switch

between Y and N. You can also hold down the 2ndF button

and press INC. or DEC. to increase or decrease the value by

10. If you want to select “UL”, it is located just below 00 and

just above 99. Once you have adjusted each value to your

desired amount, press OK to select that value and move on to

the next option to be adjusted.

If you need to go back and change something, you can press

CANCEL to back-up through the options until you get to the

one that you want to change. All the other options that you

have already set will remain programmed, so you can simply

press OK to skip over them.

Once you have set the number of TAGS (the last option), the

screen will display: “ADD” above two numbers, and will begin

making a sound effect. This sound effect indicates that the

TAG MASTER will start joining other players into the game.

The top number is the total number of players who are now

in the game, and the bottom number is a countdown timer for

the game’s automatic start (it will start automatically if that

counter reaches 00 and there are at least 2 players in the

game). The TAG MASTER needs to wait until all players have

successfully joined the game before starting the game. The

TAG MASTER can delay the automatic start of the T-Minus

countdown by pressing OK at any time to restart the 60-

second timer.

6.

The TAG MASTER can start the game by waiting for the

lower countdown to reach 00, or at any time after at least 2

players are in the game by pressing 2ndF and OK. All Joiner

TAGGER units must come close to the TAG MASTER TAGGER

for several seconds during this period. The LCD screen will

now show the T–Minus screen and the TAGGER will count

down from T-30, T-29, T-28, etc. and beep each time to alert

the players, until it reaches T-00 at which point the TAGGER

will say “GOOD LUCK!” and the game begins! The TAG MASTER

should remain in one place until all other players have begun

the T-Minus countdowns on their own screens, at which time

14