Figure 3-4. workstation scsi cable connections -7 – Quantum Tape Drive DLT VS80 User Manual
Page 21
DLT VS80 Tape Drive Installation and Operations Guide
001596-01 Rev A07
May 2004
3-7
5.
Connect the other end of the SCSI cable to the connector on your SCSI host bus adapter, as shown
in
or to the connector on the previous SCSI device on the SCSI bus.
N
OTE
: If the SCSI cable does not fit the connector on the SCSI host bus adapter,
you either have an incompatible SCSI host bus adapter or you need to
purchase a cable adapter. Contact Quantum Corporation or your SCSI
host bus adapter manufacturer for information.
Figure 3-4.
Workstation SCSI Cable Connections
Host bus adapter
SCSI cable