Vii. specifications – QSC Audio RAVE 80 User Manual
Page 24
23
VII. Specifications
Analog Audio
Sample rate
48 kHz
A/D converters
20 bits
D/A converters
20 bits
Network transmission
20 bits
THD
0.007% worst case,
0.004% @ 1 kHz
Signal to noise
RAVE 161 and 188 inputs:
104 dB typical; 102 dB worst
case, 22 Hz–22 kHz
RAVE 160 and 188 outputs:
101 dB typical; 100 dB worst
case, 22 Hz–22 kHz
Network
Data Format
Header
Standard Ethernet header
Packet trailer
4 byte CRC.
Network Capacity (without unregulated traffic)
100baseTX
64 channels
Unregulated Traffic
To maintain continuous maximum performance, we recommend that you do not share the RAVE network
with other computer network devices. Gaps are inserted between each data packet to make the network
robust to limited unregulated traffic. Recurring management traffic should not seriously affect the network,
but large computer file transfers would likely cause audio dropouts.
Delay
Group Delay
Delay through network
6.3 milliseconds or less
Delay Variation
Guaranteed ±¼ sample
periods (±5.28 µs)
AC Power
90 to 264 VAC, 47 to 63Hz.
No user selection of line
voltage or frequency is
required; the internal power
supply automatically
switches accordingly.