Enclosure, Accessories – QSC Audio WL2102 User Manual

Page 10

Preliminary System Specifications (subject to change without notice)

Configuration:

Three way, biamp (active two way) or triamp (full three way active)

Frequency Response:

52Hz - 18KHz (+/- 3dB)

Sensitivity:

biamp: 97dB (2.83v @ 1m)
triamp: 99dB (2.83v @ 1m)

Nominal coverage:

Horizontal:140deg.

Vertical: Dependant on number of elements used

Nominal Impedance:

8 ohms, low frequency in biamp mode, 16 ohms low frequency in triamp mode
16 ohms, high frequency

Transducers:

Low Frequency:

two 10" (254mm) long excursion, high power, 3" (76mm) voice coil, 16 ohm, 380
watts rms each

High Frequency:

3.0” (76mm) diaphragm, 1.4" (36mm) exit, 16 ohm neodymium compression
driver on proprietary patent-pending waveguide, 80 watts rms

Recommended Amplifier Power:

300 watts high frequency
700 watts mid frequency triamp mode
700 watts low frequency triamp mode
1400 watts low/mid frequency in biamp mode

Enclosure:

Type:

Bass reflex (ported), trapezoidal

Material:

Cored Composite laminate

Finish:

Black or white texture coat

Grille:

Powder-coated steel

Connectors:

two Neutrik NL8

Attachment points:

Self contained rigging configuration. Each front receiver tubes contains a
captive articulated joint (knuckle) and two ball-lock pins on lanyards. Rear
mounting block has integral mounting link and one ball-lock pin on lanyard.

Weight:

70lbs, 31.8kg

Dimensions:

10.75" H x 27.5"W x 20.25"D
27.3cm H x 69.85cm W x 51.43cm D

Accessories

Array Frames:

Small array frame- 8 enclosure maximum for flown (suspended) applications,
4 enclosure max. for stacking on I-215 sub cabinet (deck applications).
Frame weight 33lbs. / 15.0kg

Large Array Frame- 24 enclosure maximum for flown (suspended) applications, 12
enclosure max. for deck stacking.
Frame weight 84lbs. / 38.1kg

Software

EASE Focus line array modeling software tool available; visit www.qscaudio.com or
contact QSC’s Technical Services for DSP files for both QSControl.net and Signal
Manager

Ball-lock Pins

5/16” dia. x 0.75” long, t-handle: p-n SR000052-00
5/16” dia. x 1.25” long, button-handle: p-n SR000081-00