Oregon Scientific VR101 - Manual (Page 6)

EN
5
NOTE
GETTING STARTED
UNPACKING THE PRODUCT
When you unpack your clock, make sure to keep all the
packing materials in a safe place, in case you need to
later transport or return it for servicing.
The following items should be included in this package:
• Batteries
• Vibrating device
• User manual
BATTERIES
Please note that the batteries will be packed
separately and not installed in the unit.
To load the batteries:
1. Rotate off the battery cover by turning it counter-
clockwise.
2. Install the batteries by matching the correct
polarity. Always use the correct battery type
(2 UM - 3 AA - sized 1.5V batteries).
3. Replace the battery cover by rotating it in reverse
direction (clockwise).
WARNING Reversing the polarity may damage the
product.
SAFETY & CARE INSTRUCTIONS
SAFETY PRECAUTIONS
Please observe the following safety precautions when
setting up and using this product.
• Heat sources-Keep the product away from
heat sources, such as radiators, stoves,
heaters, and other heat-generating products.
• Water and moisture-Do not use the product
in or near water or in high moisture areas, such
as a bathroom.
CARING FOR YOUR PRODUCT
To ensure you receive the maximum benefit from using
this product, please observe the following guidelines:
• Cleaning-Use a damp cloth. Do not use liquid
cleaning agents, benzene, thinner, or aerosols.
• Ventilation-The vents and other openings are
designed for ventilation, and should not be
blocked or covered.
• Blocking the vents can cause the product to
overheat, and can damage the unit.
• Repair-Do not attempt to repair the product
or modify the circuitry by yourself. Contact the
retailer or a qualified repairman if the product
requires servicing. Only use replacement parts
that are recommended by the manufacturer.
• Do not scratch hard objects against the LCD
display as this may cause damage.
VR101 English R8 OP 7/15/04, 10:05 AM 5