Orion SKYQUEST XX14I - Manual (Page 5)

5
Parts List
Box #1: Optical Tube Assembly and Accessories
(refer to Figure 2)
Qty. Description
1
Lower optical tube section
1 Upper optical tube section
2 Dust covers
1 IntelliScope Object Locator kit (see Box #1A at right
for list of parts)
1 35mm Deep View eyepiece, 2" barrel diameter
1 10mm Sirius Plössl eyepiece, 1.25" barrel diameter
1 9x50 finder scope
1 Finder scope bracket with O-ring
1 Cooling accelerator fan kit
1 Collimation cap
3 Hex keys (2mm, 2.5mm, 4mm)
6 Counterweights, 2.3 lbs. (1.0 kg)
1 XX14i Instruction Manual (not shown)
Box #1A: IntelliScope Object Locator Kit
(refer to Figure 3)
Qty. Description
1
IntelliScope Object Locator (hand controller)
1 Altitude encoder assembly (board and disk)
1 Azimuth encoder board
1 Encoder connector board
1 Azimuth encoder disk
1 Controller cable (coil cable)
1 Azimuth encoder cable (shorter)
1 Altitude encoder cable (longer)
1 Azimuth encoder spacer washer, thin (1/4" outer
dia., 0.015" thick)
4 Encoder connector board washers (3/8" outer dia.)
2 Altitude encoder nylon spacer washers (1/4" outer
dia., white)
6 Wire clips
1 9V Battery
1 Hook-and-loop adhesive strips
1 Altitude encoder bumper
1 Altitude retaining knob spacer (3/16" thick, ½" dia.,
white)
1 Computerized Object Locator Instruction Manual
Figure 3. The parts contained in the IntelliScope Object Locator box.
Altitude encoder
and board assembly
Azimuth
encoder
disk
Azimuth
encoder
board
Encoder
connecting
board
Hook-and-loop
adhesive strips
Encoder
connect.
board
washers
(x4)
Controller coil cable
Bumper
Azimuth encoder
spacer washer,
thin
Altitude retaining
knob spacer
Altitude encoder nylon
spacer washers (x2)
Cable
clips
(x6)
9-Volt
battery
Altitude encoder
cable (longer)
Azimuth encoder
cable (shorter)
IntelliScope Object Locator
Manual