Optiview 2.28.06/4.37 - Manual (Page 13)

- 13 -
III. PTZ Control,
Control your PTZ camera and all its other associated relays remotely using this option.
When the button is pressed, the SP Dome preset keypad as shown below appears next to
the exit button.
Device Name of the
host Server
List of cameras
connected to the
Client PC
Controls the PTZ cameras internal relay (relay1) or the decoder relay
(relay 1). It may also be used to turn on a light or control an access gate .
Wiper (on/off): If you are sing the PTZ cameras with wiper control
relay, this toggles the wiper on and off.
Controls the zoom function of the PTZ camera. Zooms in or
out the image.
Overrides the auto-focus setting of the PTZ camera, allowing
the user to further focus on the image.
Overrides the PTZ cameras auto iris and allows operator to
brighten or darken the image.