Omega ISA- BUS MULTI-FUNCTIONAL BOARD OME-A822PG - Manual (Page 19)

2.4.1 8254 Counter
The 8254 Programmable timer/counter has 4 registers from Base+0 through
Base+3. For detailed programming information on the 8254 , please refer to
Intel‘s “Microsystem Components Handbook”.
Address
Read Write
Base+0 8254 Counter 0 8254 Counter 0
Base+1 8254 Counter 1 8254 Counter 1
Base+2 8254 Counter 2 8254 Counter 2
Base+3 Reserved 8254 Counter Control
2.4.2 A/D Input Buffer Register
(READ) Base+4 : A/D Low Byte Data Format
Bit 7
Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
D7 D6 D5 D4 D3 D2 D1 D0
(READ) Base+5 : A/D High Byte Data Format
Bit 7
Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 0 0 READY D11 D10 D9 D8
A/D 12 bit data : D11…..D0, D11=MSB, D0=LSB
READY =1 : A/D 12 bit data not ready
=0 : A/D 12 bit data is ready
The low 8 bit A/D data is stored in address BASE+4 and the high 4 bit data is stored in
address BASE+5. The READY bit is used as an indicator for the A/D conversion. When an
A/D conversion is completed, the READY bit will clear to zero.
OME-A-822PGL/PGH Hardware Manual ---- 17