Onkyo TX-SA706 - Manual (Page 110)

110
Controlling Other Components
—Continued
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your cas-
sette recorder, you can control your cassette recorder
with the following buttons.
The [TAPE] button is preprogrammed with the remote
control code for controlling an Onkyo cassette recorder
when used with an
connection.
For details on entering a remote control code for a differ-
ent component, see page 102.
On twin cassette decks, only Deck B can be controlled.
ON/STANDBY button
Turns the cassette recorder on or off.
Previous and Next [ ]/[ ] buttons
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [
] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [
]/[ ] buttons may not work prop-
erly with some cassette tapes.
Rewind and Fast Forward [ ]/[ ]
buttons
The Rewind [
] button starts rewind. The Fast
Forward [ ] button starts fast forward.
Reverse Play [ ] button
Starts reverse playback.
Play [ ] button
Starts playback.
MUTING button (56)
Mutes or unmutes the AV receiver/AV amplifier.
VOL [ ]/[ ] button (54)
Adjusts the volume of the AV receiver/AV ampli-
fier.
Stop [ ] button
Stops playback.
Note:
An Onkyo cassette recorder connected via
can also
be controlled in Receiver mode.
The [TUNER] button is preprogrammed with the remote
control code for controlling an Onkyo tuner when used
with an
connection.
Before controlling the tuner, turn the AV amplifier on.
[TUNER] button
Used to select either AM or FM.
CH +/– button
Used to select radio presets for a connected tuner.
Controlling a Cassette Recorder
1
6
7
8
2
3
4
5
* With some components, certain buttons may not work as
expected, and some may not work at all.
Press the appropriate
REMOTE MODE button first
Controlling a Tuner (TX-SA706 only)
1
2