Optoma EP759 - Manual (Page 13)

13 ... English
Adjusting the Projected Image
Adjusting the Projector Image Height
Tilt Adjusting Wheel
Elevator Foot
1
2
3
Elevator Button
The projector is equipped with an elevator foot for adjusting
the image height.
To raise the image:
1. Press the elevator button
n .
2. Raise the image to the desired height angle
o
, then release
the button to lock the elevator foot into position.
3. Use p to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
foot into position.
3. Use
p
to fine-tune the display angle.
Installation
1