Omron Healthcare ELITE 7300W - Manual (Page 31)

Every time you complete a measurement the monitor stores the blood
pressure and pulse rate in the memory.
The monitor automatically stores up to 84 sets of measurement values
(blood pressure and pulse rate). When 84 sets of measurement values are
stored, the oldest record is deleted to save the most recent values.
Measurements taken using the GUEST Mode are not stored in the
memory.
AVERAGING FUNCTION
The monitor calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes.
NOTE: If two sets of measurement values are stored in the memory for
the 10 minutes period, the average is based on the two sets of
measurement values. If one set of measurement values is stored,
this is displayed as the average.
TO DISPLAY THE MEASUREMENT VALUES
1. Press the Memory button ( ).
The Average Symbol ( ) appears on the display when the average
reading is shown.
USING THE MEMORY FUNCTION
31
HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 31