Onkyo MD-105X - Manual (Page 46)

46
Message list
The following table explains the various messages that appear in the display.
Message Meaning
Blank Disc A new recordable MD or a recordable MD without disc or track names is inserted.
Cannot Copy An attempt was made to make a second copy from a digitally dubbed MD (see "Rules for Digital
Recording" on page 48).
Cannot Edit An attempt was made to edit the disc during MEMORY or RANDOM play or in recording standby
mode, or an attempt to edit a premastered disc was made.
Cannot Rec An attempt was made to record onto a premastered (read-only) disc.
D. In Unlock The digital equipment (CD player, DAT, etc.) has not been connected properly. Otherwise, the
connected digital equipment is not operating properly.
Disc Error The disc is abnormal (scratched or missing a TOC).
Disc Full The disc is full (see "System Limitations" on the next page).
Impossible The disc could not be edited.
Mecha Error An error occurred in the unit’s internal mechanism.
Memory Full An attempt was made to record a 26th track.
Name Full Number of caracters has reached the limit for input to one MD.
No Change The naming attempt failed.
No Disc There is no disc in the unit.
No Track The inserted disc has a disc title but no tracks.
Not Audio An attempt was made to play a non-audio disc.
Over In pause mode (when playing is paused), the f (Fast Forward) button was pressed to the end
of the disc.
Protected The inserted disc is record-protected.
Retry Error The recording attempt failed due to a consecutive disturbance or scratches on the MD.
Temp Over An abnormally high temperature is detected in the unit’s internal mechanism.
U-TOC Error The writing of the recorded or edited contents Failed.
TOC Writing The unit is writing the recorded or edited contents to the MD.
Full An attempt was made to enter a character over the maximum character capacity while naming.
Other Information