Olympus WS-321M - Manual (Page 18)

18
1
1 While the recorder is stopped, press the MENU button
for 1 second or longer.
The “Menu” screen opens ( ☞ P. 42).
2 Press the
+
or
–
button to choose
“Sub Menu”.
3 Press the OK or 9 button.
4 Press the
+
or
–
button to choose
“Time & Date”.
5 Press the OK or 9 button.
The hour indicator flashes, indicating the
start of the Time/Date setup process.
The following steps are the same as Step 1
through Step 4 of “Setting Time/Date (Time
& Date)” (
☞ P. 17).
4
3
3
1
2
5
4
Rec Menu
Play Menu
Beep & Display
Sub Menu
e n u M
u b M e n u S
Lock
Time & Date
Format
System
Setting Time/Date (Time & Date)
3 Press the OK button to complete the setup screen.
The clock will start from the set date and time. Press the OK button
according to the time signal.
4 Press the STOP button to close the menu.
.........................................................................................................
Note
• If you press the OK button during the setup operation, the recorder will save
the items that were set to that point.
Changing the Time/Date
Press and hold the STOP button while this recorder is in stop mode to display the “Time &
Date”. If the “Time & Date” is not correct, set it using the procedure below.
Setting
Time/Date (Time & Date)