Olympus DS-50 - Manual (Page 67)

67
4
Index Marks and Temp Marks
Inde
x Marks and
T
emp Marks
..................................................................................................................................................
Notes
• Up to 16 index and temp marks can be set in a file. If you try to place more than 16 index or temp marks,
the “Index Full” message will appear for index marks, and “Temp Full” for temp marks.
• Index or temp marks cannot be set or erased in a locked file (
☞P68).
3 Press the ERASE button while the
index or temp number appears for
approximately 2 seconds on the
display.
The index or temp mark is erased.
Index or temp numbers after the erased index or temp number will
automatically move up.
Temp marks are temporary markings, so if you move to another
file, switch to the list screen, or connect the recorder to a computer,
they will be automatically erased.
3
1 Locate the index or temp mark you
want to clear.
2 Press the 9 or 0 button to select
an index or temp mark to erase.
2
1
Clearing an Index Mark or a Temp Mark
Follow the procedures below to erase index or temp marks.