Omron Healthcare 10 SERIES PLUS BP791IT - Manual (Page 24)

4. Press the SET button to confirm the change.
If on is selected, the number of seconds between each measurement is
displayed.
NOTE: The default value between each measurement is 60 seconds.
5. Press the Up or Down button ( / ) to change the interval of
time between each measurement.
The interval can be set to 15 seconds, 30 seconds, 60 seconds or 120
seconds. Continue to press the Up or Down button until the desired
interval appears on the display.
6. Press the SET button to confirm the setting.
The year flashes on the display.
SETTING TRUREAD TM
24