Omron Healthcare HJ-151 - Manual (Page 8)

15 14
USING THE MEMORY FUNCTION
This unit can store and display up to seven days of previous data.
The current day’s data is automatically stored in memory when the
time reaches 12:00AM. The display will return to 0.
NOTE:
The time must be correctly set in the unit.
How to view data stored in the memory
Press the MODE Button until the data you
want to see is displayed:
• Steps
• Moderate steps with minutes
• Calories
• Distance
Press the MEMO Button.
The previous day’s data is displayed. Continue to press the MEMO
Button to display all seven days of data.
NOTE:
If no button is pressed for more than 1 minute, the display will
return to the current day’s data.
Press the MODE Button to return to the current day’s data.
15
Press the MODE Button
to change the display.
Each time you press the MODE Button,
the display will change.
Number of steps
Number of
moderate steps
with minutes Calories Distance
BATTERY SAVING MODE
After 5 minutes with no button being pressed, the display will
automatically turn off. However, the unit continues measuring steps.
This mode extends the battery life. Press the MEMO or MODE Button
to activate the display again.
CHANGING THE DISPLAY
HJ-151-IM_Q4.qxd 07.1.25 11:09 AM Page 14