Taking a measurement – Omron Healthcare INTELLISENSE HEM-711DLX User Manual

Page 23

Text mode
Original mode

The monitor automatically determines your ideal inflation level. In rare
circumstances when a higher inflation may be necessary, the monitor
automatically re-inflates the cuff up to 30 mmHg higher than the initial
inflation and restarts the measurement.

CAUTION

Operate the device only as intended. Do not use the device for any
other purpose.

1. Press the START/STOP button.

All symbols appear on the display. The cuff starts to inflate
automatically.

As the cuff inflates, the monitor automatically determines your ideal
inflation level. This monitor detects the pulse during inflation. Do not
move your arm and remain still until the entire measurement process
is completed.

NOTE: To stop the inflation or measurement, press the

START/STOP button. The monitor will stop inflating,
start deflating and will turn off.

TAKING A MEASUREMENT

START

STOP

262640 HEM-711 EN_SP_r2.qxp 1/15/07 11:33 AM Page 23