Oregon Scientific Body Fat Monitor with Wireless Remote Display GR101 - Manual (Page 3)

Scale Unit Remote Unit
8x AA Batteries 4x Carpet Feet
User Manual Warranty Card
PLACING THE UNITS
The Scale and the Remote Monitor
should be within 8 metres of each other,
in order to ensure proper reception.
Remote Monitor Installation
Mount or place the Remote Monitor on a
wall or a flat surface as shown below. For
best results, it should be located within 8
meters of the Scale. Avoid obstructions
such as walls or heavy furniture.
Scale Placement
For best results, place the Scale on a flat,
even surface. Use the supplied carpet
feet if the Scale is to be placed on carpet.
Leave the Scale on the floor for 5
seconds to allow for self-calibration.
QUICK START
1. Install the supplied batteries into both
the Scale and Remote Monitor.
2. On the Remote Monitor, press and
hold SET to select, in order:
a. Weight unit:
lb (pound), kg (kilogram), or st-lb
(stone)
b. 12- or 24-hour format
c. Current hour
d. Current minute
e. Current year
f. Date/Month or Month/Date
format
g. Current Month
h. Current Date
�
�