One for All OARI06G - Manual (Page 18)

18
-ACROS
The One For All SmartControl remote can condense multi-
step activities to a single keypress. These are called “macros”.
&OR
Note: A macro can contain up to 15 steps.
4O
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 5. The blue ring flashes twice.
3.
&OR
ON
4. Use the device select keys to highlight the device mode
for the first step in the macro.
&OR
5. Press the key for the first command in the sequence.
&OR
6. If there are more commands for this device, press the
KEYS
&OR
When you’re finished with commands for this device, go
to step 7.
7. Use the device select keys to highlight the device mode
FOR
&OR
TV.
8.
&OR
9. If there are more commands for this device, press the
KEYS
If you’re finished with this macro, go to step 10.
If you want to use another device in this activity, repeat
steps 7 and 8.
10. Press and hold the SETUP key until the blue ring flashes
twice.
Congratulations! You have successfully programmed a macro.
Now when you press the key you designated as this macro
key, the remote will send the steps you programmed.
4O
1. Make sure the remote is pointed at the devices this
macro uses.
2. Press the key you designated for the macro.
Leave the remote pointed at the devices for several
seconds. The macro may take a few seconds to finish.