Sylvania LD370SC8 S - Manual (Page 19)

19
EN
INTRODUCTION
CONNECTION
INITIAL SETTING
WATCHING TV
O
PTIONAL SETTING
OPTIONAL SETTING
OPERATING DVD
SETTING DVD
TROUBLESHOOTING
INFORMATION
Channel List
The channel list function lets you remove undesired channels from the
channel registration list.
1
Press [SETUP] to display the main menu.
2 Use [Cursor K / L] to select “CHANNEL”, then press
[ENTER].
3 Use [Cursor K / L] to select “Channel List”, then press
[ENTER].
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use [Cursor K / L] to select the channel you want to
remove, then press [ENTER].
Channel List Channel List
DTV 8 DTV 8
9 9
DTV 48 DTV 48
58 58
DTV 6 DTV 6
27
DTV 67
Ch Select Watch/Skip Back BACK ENTER
Highlight channels for
Ch Up/Down key selection.
The channel display for the removed channel darkens.
You will not be able to select the channel again using
[CH K / L].
To reactivate a removed channel, highlight it using
[Cursor K / L] and press [ENTER]. The channel display
lightens.
When you remove a major channel, its minor
channels are removed as well.
Note:
• The channel with the “DTV” indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
5
•
•
•
Manual Register
The manual register function lets you add the channels that were not added
by the auto channel scan due to the reception condition at the initial setting.
1
Press [SETUP] to display the main menu.
2 Use [Cursor K / L] to select “CHANNEL”, then press
[ENTER].
3 Use [Cursor K / L] to select “Manual Register”, then
press [ENTER].
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
Manual Register Manual Register
For analog channels,
select a channel to register using
number keys.
For digital channels,
you must perform Autoscan function. Register
Ch Change
11
Back BACK
5 Press [SETUP] to exit.
Note:
• If set up completes successfully,
“Registered to the Channel List” is displayed.
• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.
5
A74GDUE_LD370SC8 S_EN.indd 19 A74GDUE_LD370SC8 S_EN.indd 19 2008/04/04 16:36:35 2008/04/04 16:36:35