Olympus WS-500M - Manual (Page 43)

43
4
Menu setting method
Menu setting method
• The slow playback or fast playback is
available even if either [Voice Filter] or
[Equalizer] is set (
☞ P.40, P.41).
• The slow playback or fast playback is
not available if either [Noise Cancel] or
[WOW] eff ect is set (
☞ P.40).
• Playback speed will return to normal if the
mode switch setting is changed.
Skip Space
This function enables you to skip (forward)
or reverse skip (rewind) a file being played
for a set period. This function is convenient
for quickly skipping to another playback
position or repeatedly playing back short
phrases.
1
Select [Forward Skip] or
[Reverse Skip].
2
Set the skip space.
When [Forward Skip] is selected:
[File Skip] [10sec. Skip] [30sec. Skip]
[1min. Skip] [5min. Skip]
[10min. Skip]
When [Reverse Skip] is selected:
[File Skip] [1sec. Skip] – [5sec. Skip]
[10sec. Skip] [30sec. Skip]
[1min. Skip] [5min. Skip]
[10min. Skip]
Forward/Reverse Skip Playback:
1
Press the OK
` button to start
playback.
2
Press the
9 or 0 button.
• The recorder will skip (forward) or
reverse skip (rewind) a set space and
start playing back.
• If there is an index mark/temp mark or
a cue closer than the skip space, the
recorder will forward skip/reverse skip to
that position.
. LCD/Sound Menu
Backlight
The display will remain lit for about 10 (Initial
setting) seconds when a button on the
recorder is pressed.
1
Select [Lighting Time] or
[Brightness].
2
Set the lighting time.
[Off]:
Disables
this function.
[5seconds] [10seconds] [30seconds]
[1minutes]:
Enables the Backlight function.
3
Set the brightness.
[High] [Low]:
Sets the brightness of the backlight
when lit.
Contrast
Display contrast can be adjusted in 12 levels.
You can adjust the LCD display contrast level from
[01] to [12].
LED
You can set it so the LED indicator light does
not turn on.
[On]:
LED light will be set.
[Off]:
LED light will be cancelled.
Beep
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
[On]:
Enables the Beep function.
[Off]:
Disables
this function.