Olympus WS-500M - Manual (Page 25)

25
2
Recording
To MIC jack
R
e
cording
Recording from external microphone
or other devices
The external microphone and other devices
can be connected and the sound can be
recorded. Connect as follows by the device
to be used.
• Do not plug and unplug devices into the
recorder’s jack while it is recording.
Recording with external
microphone:
Connect an external microphone to
the MIC jack of the recorder.
Applicable external microphones
(optional) (
☞ P.68)
Stereo microphone: ME51S
The built-in large-diameter microphone
enables sensitive stereo recording.
2 channel microphone (omni-
directional): ME30W
These are highly sensitive omni-
directional microphones supported by
plug-in power which are well-suited to
recording musical performances.
Highly sensitive noise-cancellation
monaural microphone
(unidirectional): ME52W
This microphone is used to record
sound at a distance while minimizing
surrounding noise.
Tie clip microphone (omni-directional):
ME15
Small concealing microphone with a
tie-clip.
Telephone pickup: TP7
Earphone type microphone can be
plugged into your ear while phoning.
The voice or conversation over the
phone can be clearly recorded.
Notes
• The built-in microphone will become
inoperable when an external microphone
is plugged into the recorder’s MIC jack.
• Microphones supported by plug-in power
can also be used.
• When the external stereo microphone is
used while [Rec Mode] is set to a monaural
recording mode, audio will be recorded to
the L channel only (
☞ P.36, P.38).
• When an external monaural microphone
is used while [Rec Mode] is set to a stereo
recording mode, it enables recording
only with the L channel microphone
(
☞ P.36, P.38).