Table stand and wall mount – Oregon Scientific RAR232 User Manual

Page 5

2. Ensure that the base of the stand fits into the 2 small holes

at the bottom of the main unit.

3. To remove the stand from the battery cover, press your

finger against the latch in the opening found at the bottom
of the stand as shown in the diagram.

4. Pull the stand out in a downward motion to release.

REMOTE UNIT

(WALL MOUNT)

(TABLE STAND)

TABLE STAND AND WALL MOUNT

The main and remote units can either be positioned on a flat
surface or mounted on a wall.

MAIN UNIT

TABLE STAND

1. Once the battery cover is on, attach the stand through the

battery cover's rectangular slot.

RAR232A-E CP5.P65

10/4/05, 11:29 AM